Fail messages and what they mean

1. "RPM_1 Start Fail"  and km/h set to 200

2. "RPM_1 Start Fail"  and km/h set to 175

3. "Speed Fail"  and km/h set to 150 

4. "GearLever N at speed"  and km/h set to 125

5. "Shut down under speed"

There is a setting how to handle the fail messages

"Setup" -> "Fail Handling"

Standart setting is "2" Please do not change this setting, unless talk to me first.

Setting = 0 (Please do not use this setting)

No fail messages and no Lock shift.

Setting = 1

1,2,3 gives a fail message no lock of shift

4,5 Locks shift if they happens, and gives a fail messages

Setting = 2

3 only gives a speed fail message no lock of shift

1,2,4,5 Locks shift if they happens, and gives a fail messages

Setting = 3

1,2,3,4,5 Locks shift if they happens, and gives a fail messages

If you get the Message, "Shut down under speed Press Left to Reset"

You have to press left on the joystick to reset the fail, only do that at stationary 0 km/h

And then power off and on again