Download | ofgear.dk

Firmware

You can update the firmware on you controller.

Depending on what version you have you have to choose from below

But you need to install a driver on you PC, and a little program to transfer the firmware. see below

Black background and white text

White background and black text, has a asymetric metal frame

Same 4 Line display as the first one here, but has Grapic gearindicator

This is the display used on all new controllers OLED, Black background and white text (Graphic)

1. Download the Firmware file above

2. Download the Driver for the Controller, and connect the controller via USB and make sure it pop up correct in DEVICE MANAGER like below

3. Then Download the programm Xloader, to transfer the file from PC to Controller. (Make sure to choose ATMEGA 2560)

4. Then upload wait until it says XXXXXX bytes uploaded

Controller-driver This is the driver you need to communitate width the Contrller

update of firmware Install Driver

(Wery importent connect PC to controller when stationary, as the controller restart when connected)

You need to connect the box to you PC,

When connectet go to Device Manager, here the Arduino Mega 2560 (and Port number) should show up.

But only if it can find the rigth driver.

Update Firmware

Program to upload new Firmware

It will look like this

Hex file send to you, is choosen.

Device Choose (Mega(ATMEGA2560)

Comport (To find you comport look in Device Manager )

Press Upload and wait until it says uploaded it takes around 60 second